Water decoloring agent Cw-08
Water Decoloring Agent CW-08
Description:This product is a quaternary ammonium cationic polymer.
If you use our water decoloring agent,Must can decrease the dosage of the PAC,and decrease the sludge quantity.
1.It is mainly used for waste water treatment for textile,printing,dyeing,paper-making,mining,ink,and so on.
2.It can be used for color removal treatment for high-colority waste water from dyestuffs plants.It is suitable to treat waste water water with activated,acidic and disperse dyestuffs.
3.It aiso can be used in the production process of paper & pulp as retention agent.
2.COD remove better(about 60%)
3.Faster sedimentation,better flocculation
4.Non-pollution (no aluminum, chlorine, heavy metal ions ect.)
|Main Components||dicyandiamide formaldehyde resin|
|Appearance||colorless or light-color sticky liquid|
|PH (30% water solution)(30%)||2.5~5.0|
|Feature||COD remove better (about 95%)|
|Note:our product can be made upon your special request. CW-01 is more viscous than CW-07|
1.The product shall be diluted with 10-40 times water and then dosed into the waste water directly.After being mixed for several minutes,it can be precipitated or air-floated to 7~8 for better result.
2.The pH value of the waste water should be adjusted to 7~8 for better result.
3.When the colority and COD are relatively high,it can be used with the help of polyaluminum chloride,but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride is used earlier or afterwards depends on the flocculation test and the treatment process.
Package and Storage:
1.It is harmless,non-explosive,it can not be placed in the sun.
2.It is packed in plastic drums with each containing 30kg,50kg,250kg,1000kg,1250kg IBC tankor others according to your requirements.
3.This product will appear layer after a long-term storage,but the effect will not be affected with stir.Storage temperature:5-30